Warp System Warp System Status Reload Config Files Change Admin Password Basic Call Control Extensions Feature Codes General Settings Trunks Outbound Routes Incoming Call Control Inbound Routes Follow Me Auto-Attendant Ring Groups Queues Conference Bridge Schedules System Options Music on Hold Paging and Intercom Call Parking Voice Recordings Phone Provisioning Aastra Phones Polycom Phones System Administration Warp WEB License DHCP Server Setup IP Address Setup eMail Server Setup Backup & Restore Upgrade Firmware Reboot Appliance

Routes New Route Route Name:Enter the name assigned to this route Group ID:Enter the group ID for this route. This is the same group ID as assigned to your extensions. 0 1 2 3 4 5 6 7 8 9 Emergency Dialing:Check this option if you use this route to terminate emergency calls. If checked, the callerid used will be the emergency CLID assigned in the extension. Intra Company Route:If checked, the CLID from the extension will be used instead. Dial PatternEnter the dialplan used by this route. Ex. 911 for emergency calls, XXXXXXXXXX for all local calls, 18XXXXXXXXX for tollfree calls, 011X. for international calls. You can also use the '|' sign to strip prefix digits like: 9|XXXXXXXXXX to dial 9+local number, but strip the 9 in front of the number when dialing out. Trunk Sequence 1Select a trunk for this dialout trunk sequence. Trunk Sequence 2Select a trunk for this dialout trunk sequence. Trunk Sequence 3Select a trunk for this dialout trunk sequence.

Your Outbound Routes Create a new Route